Solar digital charger instructions
© Copyright 2010 Ningbo Yulong Photoelectric Technology Co., Ltd
Product summary:
The charger through solar panel convert light energy into electrical energy stored in the built-in lithium battery, then output power to the phone, MP3, MP4, camera and other digital products by the control circuit . It also can be charged by adaptors (AC100V-240V) or computer USB.
This environmental item applicable to travel, tourism and fieldwork for the standby emergency power supply.
Using methods:
1, Before using,please make sure at least there is one blue charging indicator light.And there are three ways can charge it as following:
(green or bluecharging indicatorlight)
( redcharging indicatorlight.)
This item contains the overcharge protection circuit, after full charging will stop automatically, but we don't advocate long connection power after full charging .
2. Solar charger USB connect with the connecting line, then choose a suitable connectings link cell phone or other digital products to recharge.
In standard sunshine light,charge 5minutes can supply mobile phone power 1minutes for calling.
Appearance:
Insert the fitting end to the usb port, and the other to the mobile phone, then charging process will be completed.
Operational principle:
Technical parameter:
· Product material:ABS+PC
· Physical dimension:
· Colour:Rose red Olive greenRed gold Blue
White Amethyst violet Black Pink
· Bare weight:135g
1).Solar panel:
· Panel type:Mono CrystallineSilicon solar panel
· Output voltageUnder sunlight directly at noon,like 100klux)
· Output current:≥150mA(Under sunlight directly at noon,like100klux)
· Output power:w(Under sunlight directly at noon,like 100klux)
2).Adaptor charging:
· Adaptor Input:AC100V-240V
· Adaptor Output:≥DC5V 500mA
3)Product output:
· Battery capacity:2800mAH
· Operation voltage:V
· Operation current: 500mA
· Photoelectric full time:twenty hours(normal sunlight)
· Grid electricty full time:six hours
· Working temperature:-10°C-60°C
The product application scope:
Caution:
1. Before using,please make sure at least there is one charging indicator light.
2. When absorbing sunlight charge, it should adjust its position and Angle, let the light to illuminate the comprehensive, rapid charging solar panels
3. If the battery charger does not work, it is under automatic protection status. Only use AC/USB (computer) by connecting to the correct charger, or use the direct sunlight charger to try to let it start working again.
4. Please keep the charger out of the reach of children when charging under gird electricity.
5. Warning! To avoid fire or electric shock, etc., do not use this charger in the rain or any other damp environment..
6. Do not use sharp objects to scratch or scrape the surfaces of the solar panels.
7. Do not use corrosive solutions to wipe or clean the charger.
8. Don't expose the product to stress and wear.
9. Do not tamper, disassemble, or attempt to repair the charger. If there is a need to alter or repair the charger, please go to our company designated service outlets for repairs. The company does not accept responsibility for any consequences resulting from unauthorized tampering with the product.
10. To assure maximum product longevity and quality, please follow the instructions carefully and faithfully.
Special instruction:
In May,2007,Ministry of Information Industry of the People's Republic of China indicate: From 14th,Jun,2007, the standard of mobile phone charger YD/T1591-2006 will be used for all mobile phone sold in mainland.
The electic rule mentioned in YD/T1591-2006 TECHNICAL REGULATION AND TEST METHOD OF MOBILE PHONE CHARGER AND RELEVANT INTERFACE:operaton DC input for mobile phone is 5V±5%,the mobile phone which accord with this rule can be charged by the soalr charger at will.
Accessories list:
Two Connecting Lines, One AC Adapter, Six Adapter Heads, One Certificate and One Warranty Card.
If there is any change of this manual, we will have no extra notice. Meanwhile, the company has the final right of explanation regarding the contents of this manual.